scubnewb wrote:Building a single tank hookah rig for cleaning hulls and maintenance related hull work and I long ago made the switch to DIN from yoke and now all my tanks are DIN and while I thought I had a extra DIN 1st stage in the dive locker to build this rig it turns out it is a yoke and that wont work, I suppose i could buy a conversion adapter but thought I would see if any one was sitting on a extra DIN and needed a yoke and would like to swap first.
Wow - that's one hell of a run-on sentence
If you have a DIN tank and a yoke 1st stage then the DIN plug that Dave suggested will work. I have a bunch of them and if you're near Issaquah let me know and I'll give you one.
If it's a 300 bar DIN tank (deep female thread) then you'll need a DIN first stage. Converting a yoke reg to DIN is a kit that is specific to the regulator that you own.
If you have a DIN first stage and a yoke valve you can get a din to yoke converter- It will probably cost you ~$25. If the first stage you have is a scubapro MK25/MK20 I have old yoke parts you can have if you want to convert it back from DIN