good place to get regs rebuilt somewhat close to kelso?

Sabre_Rider · Post by **Sabre_Rider** » Tue Jul 05, 2011 9:11 pm

Anyone got any recommendations for somewhere to take a couple of regs to be gone thru. Got an old scubapro d300 for a backup and a mares proton metal that need kitted.

Bric Martin · Post by **Bric Martin** » Tue Jul 05, 2011 9:20 pm

7 Seas in Vancouver services Scubapro, it's a good shop. I have Apeks regs and Dave Ishmael at Tigard Underwaterworks does my regs. Dave is a great reg tech, I will use him as long as he is around. He does great work and I would say that he is one of, if not the best reg tech in PDX.

Sabre_Rider · Post by **Sabre_Rider** » Wed Jul 06, 2011 6:44 am

I'll try tigard, thanks.

spatman · Post by **spatman** » Wed Jul 06, 2011 6:49 am

Sabre_Rider wrote:I'll try tigard, thanks.

unfortunately, UWW in Tigard does not service Scubapro regs. Seven Seas in Vancouver is your best bet.

Sabre_Rider · Post by **Sabre_Rider** » Wed Jul 06, 2011 6:53 am

ok, thanks, I'll find something up north then, had issues with seven seas in the past.

nwscubamom · Post by **nwscubamom** » Wed Jul 06, 2011 8:12 am

You can always try getting them serviced by one of the best techs in the NW - Don Peterson. You just mail them to him. (he lives in Port Angeles according to his website)
http://divetechinc.com/index.html

- Janna

CaptnJack · Post by **CaptnJack** » Wed Jul 06, 2011 8:23 am

nwscubamom wrote:You can always try getting them serviced by one of the best techs in the NW - Don Peterson. You just mail them to him. (he lives in Port Angeles according to his website)
http://divetechinc.com/index.html

- Janna

I use Don, he does good work with a decent turnaround time for me. Never had an issue except with some backordered parts once (not his fault).

Dusty2 · Post by **Dusty2** » Wed Jul 06, 2011 9:17 am

nwscubamom wrote:You can always try getting them serviced by one of the best techs in the NW - Don Peterson. You just mail them to him. (he lives in Port Angeles according to his website)
http://divetechinc.com/index.html

- Janna

+1 for Don, He's the go to guy for allot of people.

Waynne Fowler · Post by **Waynne Fowler** » Wed Jul 06, 2011 1:46 pm

+100 for Don... I send TON's of reg's his way... have been doing so for nearly 10 years and have yet to have any issues. He's a top shelf tech.

Sabre_Rider · Post by **Sabre_Rider** » Wed Jul 06, 2011 1:53 pm

Cool, Don it is, thanks everyone

Linedog · Post by **Linedog** » Wed Jul 06, 2011 8:30 pm

I stumbled into Dons shop one day and was very impressed. He took me into the back and showed me his work area and all that is involved. He talked my ear off, and struck me as a truly nice, caring guy/reg tec.

Sabre_Rider · Post by **Sabre_Rider** » Sat Jul 09, 2011 8:14 am

shipped 4 regs off to don yesterday, talked with him on the phone, wow, nice guy. Thanks everyone for the heads up, really appreciate it.

Sabre_Rider · Post by **Sabre_Rider** » Mon Aug 22, 2011 7:07 am

wanted to say thanks for the advice, Don is great, fast turn around and very professional job. I would recommend him to anyone, no matter where you are.

Northwest Dive Club

good place to get regs rebuilt somewhat close to kelso?

good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?

Re: good place to get regs rebuilt somewhat close to kelso?