Compressor fittings, etc...
Compressor fittings, etc...
I just got my JORC auto drain in, and need some stuff to hook it up.
Specifically
http://augustindustries.com/High_Pressu ... _info.html
http://www.scubacompressor.com/shop/sta ... 83bc6f8040
Would prefer to find them locally, as I'm an impatient biatchm, and running out tot he compressor ever 10m is annoying at best.
Also a 1/4 NPT barbed fitting, for the outlet of the drain.
Any help appreciated.
Specifically
http://augustindustries.com/High_Pressu ... _info.html
http://www.scubacompressor.com/shop/sta ... 83bc6f8040
Would prefer to find them locally, as I'm an impatient biatchm, and running out tot he compressor ever 10m is annoying at best.
Also a 1/4 NPT barbed fitting, for the outlet of the drain.
Any help appreciated.
=============================================
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
Re: Compressor fittings, etc...
The Seattle Swagelok dealer might have what you want. I've found them VERY helpful in the past with compressor parts:
Seattle Fluid System Technologies
3315 South 116th Street, Tukwila, WA 98168
(425) 825-1115
The Seattle office is open weekdays from 7:30 a.m. to 4:30 p.m.
Seattle Fluid System Technologies
3315 South 116th Street, Tukwila, WA 98168
(425) 825-1115
The Seattle office is open weekdays from 7:30 a.m. to 4:30 p.m.
There are no stupid questions, but there sure are a lot of inquisitive idiots...
Re: Compressor fittings, etc...
Kewl, I go by that way, thx Cameron!
=============================================
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
Re: Compressor fittings, etc...
I get all of my compressor fittings at American Hose and Fitting (American Flex) in Ballard. They have a pretty good inventory and if they don't have it there they can usually get it from their main facility in Kent on the same day.
1121 Northwest 45th Street Seattle, WA 98107
(206) 789-1353
1121 Northwest 45th Street Seattle, WA 98107
(206) 789-1353
The purpose of life should not be to journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming "Holy S#it!!!" What a Ride!!!
-
- Dive-aholic
- Posts: 287
- Joined: Sun Oct 21, 2007 9:00 pm
Re: Compressor fittings, etc...
I bought all my tubing and fittings from Paramount Supply Co in Seattle
Physical Address:
10832 E. Marginal Way S.
Seattle, Washington
98168
Phone: (206) 762-1717
Scott
Physical Address:
10832 E. Marginal Way S.
Seattle, Washington
98168
Phone: (206) 762-1717
Scott
Re: Compressor fittings, etc...
South end would be preferrable...
But Camerons Tukwila place will work.
Tacoma would be better, or Federal Way.
But Camerons Tukwila place will work.
Tacoma would be better, or Federal Way.
=============================================
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
Re: Compressor fittings, etc...
Williams Oil Filter Service Company
1247 Puyallup Avenue Tacoma, WA 98421
(253) 627-8163
These guys should have what you need or
Applied Industrial Technologies (NYSE: AIT) is one of North America’s largest industrial distributors of bearings, power transmission components, hydraulic components and systems, pneumatic components and systems, industrial rubber products, linear components, tools, safety products,... (more)
1701 E. Portland Ave. TACOMA, WA
1247 Puyallup Avenue Tacoma, WA 98421
(253) 627-8163
These guys should have what you need or
Applied Industrial Technologies (NYSE: AIT) is one of North America’s largest industrial distributors of bearings, power transmission components, hydraulic components and systems, pneumatic components and systems, industrial rubber products, linear components, tools, safety products,... (more)
1701 E. Portland Ave. TACOMA, WA
http://dustys-lights.com/, An awesome light at an unbelievably low price
Dusty's Lights on facebook
http://underthesound.smugmug.com/
Dusty's Lights on facebook
http://underthesound.smugmug.com/
Re: Compressor fittings, etc...
Seattle Fluid was a total bust, they dont even have 5k psi hose tehre (well they do, but some monsterously stiff stuff).
Still couldnt find the adapter thread to my air/water seperator, even at Fittings Inc, but they ordered me one.
Still couldnt find the adapter thread to my air/water seperator, even at Fittings Inc, but they ordered me one.
=============================================
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
Re: Compressor fittings, etc...
Which adapter are you looking for? If it is the one that goes in the standard black aluminum tower, that is a stainless (do not use steel!!) AN6 to 1/4" NPTF. I have those in stock if your guy doesn't find them for you.
Last edited by rcontrera on Sat May 05, 2012 4:50 pm, edited 1 time in total.
Re: Compressor fittings, etc...
Its the valve out of the bottom of the oil/water seperator. Its an odd metric pipe thread. I'm trying to plumb in the auto drain, so need an elbow that goes into seperator, then a T with one fitting to screw in the old valve (so can release manual if I have to), then a male output of the T (1/4npt) into my JORC auto drain.rcontrera wrote:Which adapter are you looking for? If it is the one that goes in the standard black aluminum tower, that is a stainless (do not use steel!!) AN6 to 1'4" NPTF. I have those in stock if your guy doesn't find them for you.
If you have that stuff, lemme know.
=============================================
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
Re: Compressor fittings, etc...
Metrics are a pain to find the right stuff. If you don't know the size, it is extremely difficult to order the right stuff. There is a fitting and hose place not too far from you (Fife)called Western Fluid that may have what you need and if they don't, can get it ordered fairly quick. Take your valve with you unless you are sure of the size. And be careful ... 1/8 NPT looks a LOT like 1/8 BSPT. While it might fit, it will only be good once as the threads will get damaged.
Re: Compressor fittings, etc...
Well, bummer that Seattle Fluid couldn't help you. :( Ray's right about the metrics sucking for a lot of things, at least when it c comes down to electrical or plumbing.
If that's just one piece that's kind of wonky, and there's plenty of metal, you might also consider retapping for something standard here. I've done that before for some items I had and it made life a lot easier
If that's just one piece that's kind of wonky, and there's plenty of metal, you might also consider retapping for something standard here. I've done that before for some items I had and it made life a lot easier
There are no stupid questions, but there sure are a lot of inquisitive idiots...
Re: Compressor fittings, etc...
Go to Western Fluid Components in Kirkland.. http://www.westernfluidcomp.com
I bought ALL my 5000psi parker hoses there as well as all my fittings.. they have most metric fittings too.
my filter stacks used BSP (British Standard Pipe) fittings and some other metric fittings and they were able to help with everything.
Talk to "Josh"... quirky guy, but super nice and helpful.. got decent discounts too! (This stuff aint cheap)
K
I bought ALL my 5000psi parker hoses there as well as all my fittings.. they have most metric fittings too.
my filter stacks used BSP (British Standard Pipe) fittings and some other metric fittings and they were able to help with everything.
Talk to "Josh"... quirky guy, but super nice and helpful.. got decent discounts too! (This stuff aint cheap)
K
"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party" - Ron White
Re: Compressor fittings, etc...
They were helpful to me too. Although Mcmaster has always had everything I've needed. Of course if you don't know the actual thread you're screwed. I wouldn't trust anything in a HP application I wasn't totaly confident was a perfect match.kdupreez wrote:Go to Western Fluid Components in Kirkland.. http://www.westernfluidcomp.com
I bought ALL my 5000psi parker hoses there as well as all my fittings.. they have most metric fittings too.
my filter stacks used BSP (British Standard Pipe) fittings and some other metric fittings and they were able to help with everything.
Talk to "Josh"... quirky guy, but super nice and helpful.. got decent discounts too! (This stuff aint cheap)
K
Sounder wrote:Under normal circumstances, I would never tell another man how to shave his balls... but this device should not be kept secret.
Re: Compressor fittings, etc...
Western Hooked me up, they just didnt have any breathing air line...(Kirkland Store anyways). Had to order one adapter for my old valve, but I'll have my auto drain hooked up pretty quick.
=============================================
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
Re: Compressor fittings, etc...
what is the connection type to my 4500 psi bank bottles? I believe they are Sherwood 347 valves.
=============================================
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
Re: Compressor fittings, etc...
Most likely they are CGA347
Re: Compressor fittings, etc...
Ray, you still havent answered back on those hoses...
=============================================
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
Re: Compressor fittings, etc...
Recheck your email. It may have gone to your spam
Re: Compressor fittings, etc...
got it!
=============================================
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
- I got a good squirt in my mouth
- I would imagine that there would be a large amount of involuntary gagging
- I don't know about you but I'm not into swallowing it
CCR discussion on Caustic Cocktails.
Re: Compressor fittings, etc...
Jeff Pack wrote:Western Hooked me up, they just didnt have any breathing air line...(Kirkland Store anyways). Had to order one adapter for my old valve, but I'll have my auto drain hooked up pretty quick.
Just get the 5000psi parker hoses with JIC fitting from Western Fluids and clean them at home.. thats what I used for all my breathing air hoses and fill whips.
if you want CGA-347 nuts and nipples, go to PraxAir or Central Welding.. they stock them.
in fact, there is a PraxAir a few blocks down the street from Western Fluid that I bought a few 347's from a few months ago..
Then get some JIC to NPT stainless fittings from Western to complete the setup.
"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party" - Ron White