Real world example at an opportune time

Discuss Team Diving here.
User avatar
Paladin4Christ
Aquaphile
Posts: 120
Joined: Sat May 04, 2013 11:08 am

Real world example at an opportune time

Post by Paladin4Christ »

To set up the story it is necessary to understand that my wife is a skeptic at heart. She is a damn good wife and to sum it up, I out punted my coverage when I lucked into her! However, she is a skeptic, especially when it involves spending money on (blank), especially when we already have gear. I think this is not out of line and she has saved us some moolah with her yin to my yang. Nuff said.

I have been talking a lot about the DIR style of diving and how I think GUE has the "right idea" when it comes to gear choices, layout, procedures and the reasoning behind it all. On Friday, She asked for an example and I told her about the one piece webbing on a backplate and how it prevents the breakage of buckles, like we have on our ScubaPro Knighthawks. She nodded and that was that.

On Saturday, my son and I went to Keystone to dive the pilings and then fin down to the Jetty and exit. He had ear problems and couldn't get clear past about 18 feet. (Silly kids, he knew this was going to be my 99 and 100 dives and he didn't want to ruin it so he didn't mention his head was stuffy.) We called the dive and ascended just down from the piling. My wife and other kids were there and when I handed off my weights wouldn't you know the shoulder strap buckle on my BC let go and everything instantly went to my knees and then to the ground. The response I got from my wife was, "Ahhh now I see what you were talking about." I hate to have gear break but if it had to break it couldn't have happened at a more perfect location - not in the water and in front of my wife. :)

To end my bloviating, my son and I both have three 120 pound zip ties as a safety measure over each buckle! Oh and she added an envelope to the safe labeled "BCD's for my boys". See I told you I out punted my coverage! :supz:
User avatar
LCF
I've Got Gills
Posts: 5697
Joined: Tue May 30, 2006 5:05 pm

Re: Real world example at an opportune time

Post by LCF »

Great story!

Dive gear has a nasty habit of breaking anywhere it can . . . I've found the simpler I can keep my stuff, the less trouble I have with it :)
"Sometimes, when your world is going sideways, the second best thing to everything working out right, is knowing you are loved..." ljjames
User avatar
Nwbrewer
I've Got Gills
Posts: 4620
Joined: Fri Jul 21, 2006 10:59 am

Re: Real world example at an opportune time

Post by Nwbrewer »

If it were me, I'd be looking into used BP/W's on Scubaboard and Decostop. Then flipping the knighthawks onto Craigslist or scubaboard. You might even come out cash even on it depending on how used the knighthawks are.
"Screw "annual" service,... I get them serviced when they break." - CaptnJack (paraphrased)


"you do realize you're supposed to mix the :koolaid: with water and drink it, not snort the powder directly from the packet, right? :smt064 " - Spatman
User avatar
Paladin4Christ
Aquaphile
Posts: 120
Joined: Sat May 04, 2013 11:08 am

Re: Real world example at an opportune time

Post by Paladin4Christ »

Nwbrewer wrote:If it were me, I'd be looking into used BP/W's on Scubaboard and Decostop. Then flipping the knighthawks onto Craigslist or scubaboard. You might even come out cash even on it depending on how used the knighthawks are.
In theory this is a great idea....BUT, I am in the DiveCon program with my LDS and need to support the shop. The cool thing is when I took my tanks in to be filled, I asked about the ScubaPro Pure Tek system and he is going to give me a killer deal! Hopefully, he will let me sell my Knighthawks on consignment in the shop since they are in awesome shape, excluding the buckles that broke.

Thanks for the idea though!
User avatar
Norris
NWDC Moderator
NWDC Moderator
Posts: 4695
Joined: Wed Sep 03, 2008 2:31 pm

Re: Real world example at an opportune time

Post by Norris »

Paladin4Christ wrote:
Nwbrewer wrote:If it were me, I'd be looking into used BP/W's on Scubaboard and Decostop. Then flipping the knighthawks onto Craigslist or scubaboard. You might even come out cash even on it depending on how used the knighthawks are.
In theory this is a great idea....BUT, I am in the DiveCon program with my LDS and need to support the shop. The cool thing is when I took my tanks in to be filled, I asked about the ScubaPro Pure Tek system and he is going to give me a killer deal! Hopefully, he will let me sell my Knighthawks on consignment in the shop since they are in awesome shape, excluding the buckles that broke.

Thanks for the idea though!
:popcorn: :popcorn: :popcorn:
**Pinch it, don't stick your finger through. You're just pinching a bigger hole.
CAPTNJACK - 2012**
User avatar
Jeremy
I've Got Gills
Posts: 1547
Joined: Sat Jul 16, 2011 3:25 pm

Re: Real world example at an opportune time

Post by Jeremy »

What is a DiveCon program?
User avatar
Paladin4Christ
Aquaphile
Posts: 120
Joined: Sat May 04, 2013 11:08 am

Re: Real world example at an opportune time

Post by Paladin4Christ »

Jeremy wrote:What is a DiveCon program?
It's a half step between Dive Master and Instructor for Scuba Schools International. It stands for Dive Control Specialist.
User avatar
Paladin4Christ
Aquaphile
Posts: 120
Joined: Sat May 04, 2013 11:08 am

Re: Real world example at an opportune time

Post by Paladin4Christ »

Norris wrote:
Paladin4Christ wrote:
Nwbrewer wrote:If it were me, I'd be looking into used BP/W's on Scubaboard and Decostop. Then flipping the knighthawks onto Craigslist or scubaboard. You might even come out cash even on it depending on how used the knighthawks are.
In theory this is a great idea....BUT, I am in the DiveCon program with my LDS and need to support the shop. The cool thing is when I took my tanks in to be filled, I asked about the ScubaPro Pure Tek system and he is going to give me a killer deal! Hopefully, he will let me sell my Knighthawks on consignment in the shop since they are in awesome shape, excluding the buckles that broke.

Thanks for the idea though!
:popcorn: :popcorn: :popcorn:
Hehe Good one. Notice I didn't say the ScubaPro Form Tek System...

All though...just think about all the swag you could hang on the 11 D-Rings.
User avatar
kdupreez
I've Got Gills
Posts: 1724
Joined: Mon Apr 20, 2009 3:27 am

Re: Real world example at an opportunities

Post by kdupreez »

The scubapro pure tek system is actually not a bad system if you can get a good deal on it.

Its pretty much a standard bp/wing system with a couple oddities,like the big ass dump valve pull tab doohickey.. But mostly a solid system. Especially the single tank config.

If you can get that at an awesome deal equivalent to used stuff on this or other boards, I say go for it..
"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party" - Ron White
User avatar
chokolad
Avid Diver
Posts: 81
Joined: Tue Sep 07, 2010 10:36 pm

Re: Real world example at an opportunities

Post by chokolad »

kdupreez wrote:Its pretty much a standard bp/wing system with a couple oddities,like the big ass dump valve pull tab doohickey.. But mostly a solid system. Especially the single tank config.
I guess one can always cut away "big ass dump valve pull tab doohickey" :)
User avatar
Paladin4Christ
Aquaphile
Posts: 120
Joined: Sat May 04, 2013 11:08 am

Re: Real world example at an opportunities

Post by Paladin4Christ »

kdupreez wrote:The scubapro pure tek system is actually not a bad system if you can get a good deal on it.

Its pretty much a standard bp/wing system with a couple oddities,like the big ass dump valve pull tab doohickey.. But mostly a solid system. Especially the single tank config.

If you can get that at an awesome deal equivalent to used stuff on this or other boards, I say go for it..
HA! Big ass dump valve pull tab doohickey - good one! I'm going to steal that! I guarantee you will hear this again.

I didn't even think twice about the "BADVPTD" and thought it was a standard wing thing, incase one got upended.

Seriously, thanks for the support...especially since you know my motivations are in the right spot.
User avatar
chokolad
Avid Diver
Posts: 81
Joined: Tue Sep 07, 2010 10:36 pm

Re: Real world example at an opportunities

Post by chokolad »

Paladin4Christ wrote: HA! Big ass dump valve pull tab doohickey - good one! I'm going to steal that! I guarantee you will hear this again.

I didn't even think twice about the "BADVPTD" and thought it was a standard wing thing, incase one got upended.

Seriously, thanks for the support...especially since you know my motivations are in the right spot.
Koos was referring specifically to big plastic monstrosity on the end of the dump valve string. DIR divers usually dump via that valve 90% :popcorn: percent of the time. They just don't have a plastic thingie at the end of the string.

Something like that

Image
User avatar
kdupreez
I've Got Gills
Posts: 1724
Joined: Mon Apr 20, 2009 3:27 am

Re: Real world example at an opportune time

Post by kdupreez »

Exactly what Serge said!

Almost all wings have 'em dump valve pull tab doohickies for pulling the dump valve, but SP used one of the "big ass" variety that comes on all of their standard BCD's.

Its not a big deal and in fact, they wont get CE ratings in Europe without them, scubapro's is just a little excessive and you can if course just cut it in 2 seconds.

Here's a pic comparing the knotted, standard and big ass varieties:

Image

I've caught these standard ones even in argon rigs and waist straps and they are a pita to get free once they are trapped. not a huge issue, but will make for an irritating experience because as you inflate the bcd, the trapped string tensions and pulls the dump valve and automatically deflates for you..

the only other small gripe I personally have was like I've told you, with the inflator hose and inflator itself is also their standard bcd inflator (the hose is too long and the inflator a little small).

Again, these are not a big deal at all as you start using it, but these finer details will start to matter more in the long run when you start clipping stuff to the D-Rings and start using thick dry gloves, etc. Again, all of these are small issues and are all fixable with less than $20 parts from dive gear express.

If you can get these at a good deal AND you can support your LDS, go for it!! Scubapro makes quality equipment.
"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party" - Ron White
User avatar
Paladin4Christ
Aquaphile
Posts: 120
Joined: Sat May 04, 2013 11:08 am

Re: Real world example at an opportune time

Post by Paladin4Christ »

Ahh ok...now the light comes on. The BADVPTD is a pain in the butt. I have had the one on my left shoulder dump valve on my Knighthawk caught under the shoulder strap and it is a pain in the butt to get unstuck. I haven't ever had the bottom BADVPTD get caught on anything.

Seems like a simple fix, if need be.

Learn something new everyday...makes living good!

The question is: 40# donut set up for a single or just go for the 60# donut for doubles and run the single tank adapter, until I decide to go doubles, which I would like to go to at sometime in next year or so?
Last edited by Paladin4Christ on Mon May 20, 2013 9:31 pm, edited 1 time in total.
User avatar
kdupreez
I've Got Gills
Posts: 1724
Joined: Mon Apr 20, 2009 3:27 am

Re: Real world example at an opportune time

Post by kdupreez »

just dont cut it off your jacket style bcd's - the shoulder dump for example will be fairly useless without a BADVPTD

the butt dump on jacket bcd's are also on the outside.. on wings, they are on the inside and gest stuck a lot easier.
"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party" - Ron White
User avatar
chokolad
Avid Diver
Posts: 81
Joined: Tue Sep 07, 2010 10:36 pm

Re: Real world example at an opportune time

Post by chokolad »

Paladin4Christ wrote: The question is: 40# donut set up for a single
This. And you still probably want STA. 60# doubles wing on a single is a rather bad idea :stir:
User avatar
Nwbrewer
I've Got Gills
Posts: 4620
Joined: Fri Jul 21, 2006 10:59 am

Re: Real world example at an opportune time

Post by Nwbrewer »

chokolad wrote:
Paladin4Christ wrote: The question is: 40# donut set up for a single
This. And you still probably want STA. 60# doubles wing on a single is a rather bad idea :stir:
+1 60# wing on single tanks is no fun at all. By the time you're ready for doubles, the extra cost of a dedicated doubles wing will be the least of your expensive issues.
"Screw "annual" service,... I get them serviced when they break." - CaptnJack (paraphrased)


"you do realize you're supposed to mix the :koolaid: with water and drink it, not snort the powder directly from the packet, right? :smt064 " - Spatman
User avatar
kdupreez
I've Got Gills
Posts: 1724
Joined: Mon Apr 20, 2009 3:27 am

Re: Real world example at an opportune time

Post by kdupreez »

Nwbrewer wrote:
chokolad wrote:
Paladin4Christ wrote: The question is: 40# donut set up for a single
This. And you still probably want STA. 60# doubles wing on a single is a rather bad idea :stir:
+1 60# wing on single tanks is no fun at all. By the time you're ready for doubles, the extra cost of a dedicated doubles wing will be the least of your expensive issues.
+2 :rawlings:
"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party" - Ron White
User avatar
Paladin4Christ
Aquaphile
Posts: 120
Joined: Sat May 04, 2013 11:08 am

Re: Real world example at an opportune time

Post by Paladin4Christ »

I don't think it could be anymore clear...40# bladder!

Thank you for the advice. I almost made a serious mistake with that one. Whew!

Again, thanks for the knowledge share! Hopefully someday I will be in the position to pay it forward and maybe even back!
User avatar
Mortuus
Amphibian
Posts: 859
Joined: Sat Aug 20, 2011 5:57 pm

Re: Real world example at an opportune time

Post by Mortuus »

Yeah. Add another +1 to the 40# for singles, and ~60# for doubles
User avatar
Nwbrewer
I've Got Gills
Posts: 4620
Joined: Fri Jul 21, 2006 10:59 am

Re: Real world example at an opportune time

Post by Nwbrewer »

Mortuus wrote:Yeah. Add another +1 to the 40# for singles, and ~60# for doubles
Honestly, unless you're planning some BIG doubles (119-130's) 60lbs is a on the high side. For 100's or 85's a 50lb wing is about right. (I've used double 119's with my 55 with no trouble.)
"Screw "annual" service,... I get them serviced when they break." - CaptnJack (paraphrased)


"you do realize you're supposed to mix the :koolaid: with water and drink it, not snort the powder directly from the packet, right? :smt064 " - Spatman
User avatar
kdupreez
I've Got Gills
Posts: 1724
Joined: Mon Apr 20, 2009 3:27 am

Re: Real world example at an opportune time

Post by kdupreez »

I agree - wing size, depending on tank size for doubles.

7.25" and smaller tanks you can use a ~40lb wing and larger tanks go for 40+lb

my HP100's (7.25") with Nitrox, I use a 40lb Evolve and HP130's (8") with Trimix I use my 60lb Evolve
"I believe that if life gives you lemons, you should make lemonade... And try to find somebody whose life has given them vodka, and have a party" - Ron White
User avatar
Paladin4Christ
Aquaphile
Posts: 120
Joined: Sat May 04, 2013 11:08 am

Re: Real world example at an opportune time

Post by Paladin4Christ »

40# will work for me. I use LP 108's and 95's, so the I'm gtg with 40#.

I'm just grateful I didn't put out the $$$ on a 60# thinking I was killing two birds with one bladder. :taco:
I guess bigger isn't always better!
User avatar
Mortuus
Amphibian
Posts: 859
Joined: Sat Aug 20, 2011 5:57 pm

Re: Real world example at an opportune time

Post by Mortuus »

Nwbrewer wrote:
Mortuus wrote:Yeah. Add another +1 to the 40# for singles, and ~60# for doubles
Honestly, unless you're planning some BIG doubles (119-130's) 60lbs is a on the high side. For 100's or 85's a 50lb wing is about right. (I've used double 119's with my 55 with no trouble.)
Also agree. My "~60#" was supposed to stretch down to 50 or 55, but I guess that wasn't entirely clear. I use large Faber LP108s, and even with those, I feel like I could easily get away with a smaller wing if i am not carrying a bottle as well. So yes. You are absolutely right.
User avatar
Paladin4Christ
Aquaphile
Posts: 120
Joined: Sat May 04, 2013 11:08 am

Re: Real world example at an opportune time

Post by Paladin4Christ »

Ordered my 40# single tank wing, single tank adapter, and continuous weave harness system yesterday!!! I ended up getting a Highland SS backplate, too.

Thank you all for stopping me from making a massive mistake with the 60# double wing!

If anyone has some words of wisdom in helping me set it up, adjust it, etc...I'm all ears. I did read that you should not cut the webbing until you have dove multiple times. This way you don't cut it too short.

Again, thanks to all that helped me!
Post Reply