Scuba Mix Panel and large lot of parts.
The panel has the following components:
*4 gauges (one is bad)
*6 control valves
*1/4 percent mix gauge
*DIN fill whip
*Bleed off valve
*Intermediate pressure regulator (set at any pressure you wish and prevent accidentally pushing too high a pressure to the tank being filled, example 4500 psi bank and 3000psi max fill pressure).
*Check Valves
*Numerous Swagelok & Parker stainless fittings. At $15-$20 per fitting, these add up quickly.
*All stainless tube construction.
I also have a fairly large lot of extra connectors. Various bits of stainless tube. Overpressure safety valves. Also Haskel pilot valves, etc...
Also, have a second panel that is mostly robbed of its parts, but still has a few gauges left in it.
Those who have built their own custom panel will recognize the cost that goes into one of these.
Make Offer. I may prefer to hold on to this until the compressor and booster have been sold as this is my means of demonstrating those items.
see my craigslist post for pictures
http://seattle.craigslist.org/est/spo/4769413341.html