LP95 and LP 98- New Price I need to sell them-Updated 2/28/2022

No commercial posts, please. Individual divers only.
Post Reply
markmwilson
Getting To Know Folks
Posts: 8
Joined: Mon Nov 23, 2015 1:20 pm

LP95 and LP 98- New Price I need to sell them-Updated 2/28/2022

Post by markmwilson »

Faber LP 95- White
VIP for 40% 06/2021
Plus rated Hydro 06/2021
Yoke valve
Faber\OMS LP98- Gray
VIP for 40% 03/2021 Vipped today so good to 3/2023
Plus rated Hydro 03/2021
Valve is OMS with insert for yoke but the insert will not come out.
$125.00 each
I'm in the Mill Creek Maltby area but can meet within a reasonable distance
Cross Posted at Rain City Scuba
Attachments
LP98 tank.jpg
LP 98 VIP.jpg
LP 98 Hydro.jpg
LP 95.jpg
LP 95 Hydro.jpg
Faber LP95 VIP.jpg
Last edited by markmwilson on Mon Feb 28, 2022 2:05 pm, edited 1 time in total.
brandoncole
Hi, I'm New To NWDC!
Posts: 2
Joined: Fri Jan 28, 2022 7:20 pm

Re: LP95 and LP 98- New Price I need to sell them

Post by brandoncole »

Hi there. RE that OMS LP98. Is the yoke screw in insert welded in due to saltwater bridge? cross threaded? I currently have all yoke regs, but plan to start gradually switching over to DIN, so I don't want to buy a tank that can't be used with both.
Thank you,
Brandon
tel: 509-FiveThreeFive-3489
markmwilson
Getting To Know Folks
Posts: 8
Joined: Mon Nov 23, 2015 1:20 pm

Re: LP95 and LP 98- New Price I need to sell them

Post by markmwilson »

Brandon: I'm assuming that it is salt water welded. I have never removed it and bought the tank new so it should not be cross threaded. I asked a knowledgeable person about it and was told if the valve were removed for service it might be able to be cleaned and loosened. I gave it as much torque as I felt comfortable applying to not strip out the plug. I can't make any guarantees other than that.
brandoncole
Hi, I'm New To NWDC!
Posts: 2
Joined: Fri Jan 28, 2022 7:20 pm

Re: LP95 and LP 98- New Price I need to sell them

Post by brandoncole »

Thank you Mark. I think you're probably right. I speak from similar experience with an insert. In the end, I replaced the valve. OK, well thanks again. For now I will stand down.
markmwilson
Getting To Know Folks
Posts: 8
Joined: Mon Nov 23, 2015 1:20 pm

Re: LP95 and LP 98- New Price I need to sell them

Post by markmwilson »

Np Thanks for letting me know.
User avatar
Nwbrewer
I've Got Gills
Posts: 4571
Joined: Fri Jul 21, 2006 10:59 am

Re: LP95 and LP 98- New Price I need to sell them

Post by Nwbrewer »

Throwing the valve in an ultrasonic cleaner with some white vinegar is your best bet to loosen that up. I would think your LDS could do that for you at the next VIP since they typically service the valves at VIP.
"Screw "annual" service,... I get them serviced when they break." - CaptnJack (paraphrased)


"you do realize you're supposed to mix the :koolaid: with water and drink it, not snort the powder directly from the packet, right? :smt064 " - Spatman
markmwilson
Getting To Know Folks
Posts: 8
Joined: Mon Nov 23, 2015 1:20 pm

Re: LP95 and LP 98- New Price I need to sell them

Post by markmwilson »

That is always an option that I may have to do if it does not sell to someone who wants a yoke valve.
Post Reply