DC Dry Glove Ring Tool

cardiver · Post by **cardiver** » Tue Apr 20, 2010 3:04 pm

Does anybody have one of these that I can borrow? I'm having a hell of a time putting my new gloves on the rings without it!
Thanks!

Grateful Diver · Post by **Grateful Diver** » Tue Apr 20, 2010 3:23 pm

I just use a coupla medium-sized A clamps ... works great.

... Bob (Grateful Diver)

ERP · Post by **ERP** » Tue Apr 20, 2010 8:51 pm

You can make one, buy a piece of plastic pipe from your local hardware store, with the right ID, the white pipe is better, the black stuff tends to be too stiff.
cut one inch off the end.
Grind a ridge around the center. To keep the ORing on it.
Cut it, and your done.

psundquist · Post by **psundquist** » Tue Apr 20, 2010 9:44 pm

A tool isn't needed with 2 people. I don't remember the exact technique but helped Matt @ NWSD replace mine. A youtube video showing how to do it with the mystery tool is located here http://www.youtube.com/watch?v=J_JWR09pf8A

cardiver · Post by **cardiver** » Tue Apr 20, 2010 9:49 pm

psundquist wrote:A tool isn't needed with 2 people. I don't remember the exact technique but helped Matt @ NWSD replace mine. A youtube video showing how to do it with the mystery tool is located here http://www.youtube.com/watch?v=J_JWR09pf8A

When he put mine on originally he said that he had to go in back and do it because, "I didn't want to see what a pita it was"....

ERP · Post by **ERP** » Tue Apr 20, 2010 10:03 pm

All I know is that when I replaced mine for the first time it involved a lot of swearing, and the rings being hurled across the room on several occasions. And I'm generally pretty patient.

dieseldude · Post by **dieseldude** » Tue Apr 20, 2010 10:12 pm

ERP wrote:All I know is that when I replaced mine for the first time it involved a lot of swearing, and the rings being hurled across the room on several occasions. And I'm generally pretty patient.

Amen brother. That was me. It is doable though.
MJ

Burntchef · Post by **Burntchef** » Wed Apr 21, 2010 7:38 am

switch over to the deep sea neo dry gloves and you will never have that problem again.

Grateful Diver · Post by **Grateful Diver** » Wed Apr 21, 2010 8:19 am

Seriously ... coupla A-clamps and it's simple. I can change the gloves on my DC rings in about two minutes without any additional tools or help ...

... Bob (Grateful Diver)

cardiver · Post by **cardiver** » Wed Apr 21, 2010 8:35 am

Grateful Diver wrote:Seriously ... coupla A-clamps and it's simple. I can change the gloves on my DC rings in about two minutes without any additional tools or help ...

... Bob (Grateful Diver)

I'm looking forward to seeing you do that, Bob. It will save me a lot of grief!

Jaksonbrown · Post by **Jaksonbrown** » Wed Apr 21, 2010 8:40 am

Grateful Diver wrote:Seriously ... coupla A-clamps and it's simple. I can change the gloves on my DC rings in about two minutes without any additional tools or help ...

... Bob (Grateful Diver)

Got any pics of how you do this bob?? I am getting tired of taking the skin off my knuckles....

Grateful Diver · Post by **Grateful Diver** » Wed Apr 21, 2010 9:27 am

Jaksonbrown wrote:
Grateful Diver wrote:Seriously ... coupla A-clamps and it's simple. I can change the gloves on my DC rings in about two minutes without any additional tools or help ...

... Bob (Grateful Diver)
Got any pics of how you do this bob?? I am getting tired of taking the skin off my knuckles....

I'll take some when I show Ron how it's done ...

... Bob (Grateful Diver)

scottsax · Post by **scottsax** » Wed Apr 21, 2010 9:31 am

Burntchef wrote:switch over to the deep sea neo dry gloves and you will never have that problem again.

+1!!

Waynne Fowler · Post by **Waynne Fowler** » Wed Apr 21, 2010 9:51 am

Burntchef wrote:switch over to the deep sea neo dry gloves and you will never have that problem again.

XS-Scuba also makes a couple sets... 3mm and 5mm... ask Winter what she thinks of hers she has a set of the 5mm
http://www.xsscuba.com/neo_gloves.html

cardiver · Post by **cardiver** » Wed Apr 21, 2010 2:18 pm

scottsax wrote:
Burntchef wrote:switch over to the deep sea neo dry gloves and you will never have that problem again.
+1!!

That's what I've been using for 3 years. You still need to install the rings on the gloves.

scottsax · Post by **scottsax** » Wed Apr 21, 2010 2:27 pm

cardiver wrote:
scottsax wrote:
Burntchef wrote:switch over to the deep sea neo dry gloves and you will never have that problem again.
+1!!
That's what I've been using for 3 years. You still need to install the rings on the gloves.

So you're saying that after 3 years and hundreds of dives, they can't be expected to last forever? Jeez, man...

I got assistance from the lovely and talented Mrs. Sax, who apparently has the grip strength of a longshoreman, because we (she) had no trouble getting them on...

cardiver · Post by **cardiver** » Wed Apr 21, 2010 2:56 pm

scottsax wrote:
cardiver wrote:
scottsax wrote:
Burntchef wrote:switch over to the deep sea neo dry gloves and you will never have that problem again.
+1!!
That's what I've been using for 3 years. You still need to install the rings on the gloves.
So you're saying that after 3 years and hundreds of dives, they can't be expected to last forever? Jeez, man...

I got assistance from the lovely and talented Mrs. Sax, who apparently has the grip strength of a longshoreman, because we (she) had no trouble getting them on...

Hold on. I never said anything about the quality of the gloves. All I did was ask if anyone had a TOOL to install the rings.

scottsax · Post by **scottsax** » Wed Apr 21, 2010 3:09 pm

cardiver wrote:Hold on. I never said anything about the quality of the gloves. All I did was ask if anyone had a TOOL to install the rings.

Hmm... the html tag I used didn't seem to work. Spatman, what's the sarcasm font, again?

spatman · Post by **spatman** » Wed Apr 21, 2010 3:25 pm

scottsax wrote:
cardiver wrote:Hold on. I never said anything about the quality of the gloves. All I did was ask if anyone had a TOOL to install the rings.
Hmm... the html tag I used didn't seem to work. Spatman, what's the sarcasm font, again?

cardiver · Post by **cardiver** » Fri Apr 23, 2010 10:53 pm

Thanks to Bob for showing me a very simple way to put the rings on my gloves without needing four hands! :smt038

Dusty2 · Post by **Dusty2** » Sat Apr 24, 2010 11:32 am

So where's the pics???

cardiver · Post by **cardiver** » Sat Apr 24, 2010 12:31 pm

Dusty2 wrote:So where's the pics???

We didn't take any..... It was a very simple process, though.
All you do is fold the glove over the o ring in a small section and get it started on the ring. Next you place one of the clamps on the glove to hold that small section in place. After that you can get about half of the glove on and then clamp with the next a clamp. Once those are in place you can roll the other half of the glove right onto the ring. Done! The first one took me about 2 minutes and the second one took a minute.

Grateful Diver · Post by **Grateful Diver** » Sat Apr 24, 2010 8:02 pm

Dusty2 wrote:So where's the pics???

Hi Dusty ...

Sorry, no pics. Ron was running a bit late last night and I had to get up early this morning ... so I'm afraid I kinda hurried him along a bit so I could go to bed.

It's a very simple process, and if you're interested in hooking up at Redondo some evening, I can show you in just a few moments ... and then we can go diving ... $\:D/$

... Bob (Grateful Diver)

Northwest Dive Club

DC Dry Glove Ring Tool

DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool

Re: DC Dry Glove Ring Tool