Water in SPG Gauge

Need advice on recreational gear configurations? Look no further than this equipment forum.
User avatar
Tangfish
NWDC Mascot
NWDC Mascot
Posts: 7310
Joined: Fri Dec 30, 2005 3:11 pm

Re: Water in SPG Gauge

Postby Tangfish » Wed Aug 01, 2018 10:27 pm

Like Eaze-E said, "throw it in the gutter, and go and buy another"

User avatar
H20doctor
I've Got Gills
Posts: 3908
Joined: Fri Apr 18, 2008 12:13 pm

Re: Water in SPG Gauge

Postby H20doctor » Wed Aug 01, 2018 9:30 pm

Toss It ....
NWDC Rule #2 Pictures Or it didn't Happen

User avatar
BillZ
Aquanaut
Posts: 653
Joined: Mon Mar 03, 2008 1:23 am

Re: Water in SPG Gauge

Postby BillZ » Wed Aug 01, 2018 8:47 pm

No matter how it happened the SPG is toast and can't be trusted now that salt water has entered the main housing.

As John mentioned, the brass & glass SPGs are much more reliable and you can pick one up for ~$60 at Dive Gear Express.


EDIT - I found one exactly like yours in my "scuba stuff" box. You can have it gratas- just PM me your shipping address.

[img]
Photo%20Aug%2001,%209%2002%2025%20PM.jpg
[/img]
Attachments
Photo Aug 01, 9 02 25 PM.jpg

User avatar
johndo88
Compulsive Diver
Posts: 310
Joined: Sat Nov 03, 2012 3:50 pm

Re: Water in SPG Gauge

Postby johndo88 » Wed Aug 01, 2018 11:36 am

Could the two little O-rings that sit on either end of the long pin tube thingie be the culprit?

The long pin is called a spindle (at least that's what I've been told). If those O-rings were bad, you would see champagne bubbles coming out. Those O-rings can't fill your gauge with water. There is a chance that there is a over pressure relief plug on the back of the gauge; a failure there can certainly cause it to leak.

On a personal note, if you have a D-ring on your kit on your left side, may I suggest taking this opportunity to switching to a brass/glass gauge and attaching a bolt snap to fasten your gauge to the D-ring. :)

Cheers,

John

User avatar
Desert Diver
Extreme Diving Machine
Posts: 449
Joined: Tue May 22, 2012 9:20 pm

Re: Water in SPG Gauge

Postby Desert Diver » Mon Jul 30, 2018 8:53 pm

Those do that after awhile. I own several of them and have seen other peoples leak too. The good part is the gauge doesn't stop working right away so you have time to buy another one.
new https://www.amazon.com/gp/offer-listing ... dition=all

User avatar
Diverdave68
Frequent Bubbler
Posts: 40
Joined: Fri Jul 22, 2016 10:55 am

Re: Water in SPG Gauge

Postby Diverdave68 » Mon Jul 30, 2018 1:05 pm

If I understand you correctly. It functions correctly on the inside except it has water. The leak has nothing to do with the pressure side of the gauge. It sounds like the leak is on the ambient side of the gauge. More than likely there's a crack or the plug fell out. Either way it looks like a paperweight.

User avatar
CaptnJack
I've Got Gills
Posts: 7720
Joined: Fri Jul 07, 2006 2:29 pm

Re: Water in SPG Gauge

Postby CaptnJack » Mon Jul 30, 2018 9:29 am

There's usually a large oring that seals the clear (plastic or glass) face to the body. Those are the prime failure points. In theory you can disassemble a glass&brass one, clean out the insides and replace that oring. But nobody ever does because spgs are cheap and it would take hours and special tools just to get it apart. And good luck finding a tiny custom oring. The plastic ones are pretty much goners. In both cases the bourdon tube is copper and will eventually corrode.

That one has seen better days and for ~$50 replacing it is a good idea.
Sounder wrote:Under normal circumstances, I would never tell another man how to shave his balls... but this device should not be kept secret.

User avatar
nwscubamom
I've Got Gills
Posts: 2303
Joined: Tue Mar 14, 2006 12:13 pm

Water in SPG Gauge

Postby nwscubamom » Mon Jul 30, 2018 9:17 am

(yes, I realize the title is redundant - SPG Gauge... :tomnic: )

Here's a weird one! I was diving KVI and Alki Fishing Reef on Saturday, and noticed my Oceanic pressure gauge had water in it! Didn't seem to harm the reading needle, and was fully functional, but nevertheless, there's water where water should not be inside the thing.

The whole gauge is enclosed in a console and protected, and there are no obvious cracks in the face.

Could the two little O-rings that sit on either end of the long pin tube thingie be the culprit? Bad O-ring? Or is water leaking in another way, perhaps from the pressure relief valve on the backside of the gauge?

I imagine now that it's had saltwater inside of it, I should probably scrap the whole thing and get a new one....No way to really rinse it out with fresh water.

Anyone else have this happen or know what could have caused it? The amount of water that's in there now was nothing compared to what was in it when I was diving. Some must have leaked back out? And then there's the whole pressure factor making the air bubble smaller at depth...Sorry for the blurry photo - part of that's me, part of it is the contact paper I put on the gauge face to protect it.
IMG_3619.JPG
Janna Nichols
My underwater photo galleries
REEF Citizen Science Program Manager
Seen any cool critters lately?
><((((°>
-----------------------------


Return to “Gear Central (Recreational)”

Who is online

Users browsing this forum: No registered users and 1 guest